8-channel saturated sink driver always order by complete part number: part number package udn2595a 18-pin dip a2595slw 20-lead wide-body soic absolute maximum ratings at 25 c free-air temperature for any one driver (unless otherwise noted) output voltage, v ce ...................... 20 v supply voltage, v s ........................ 20 v input voltage, v in ......................... 20 v output current, l c .................... 200 ma ground terminal current, i gnd ... 1.6 a package power dissipation, p d ................................. see graph operating temperature range, t a ......................... -20 c to +85 c storage temperature range, t s ........................ -55 c to +150 c data sheet 29320b 2595 dwg. no. a-11,407 developed for use with low-voltage led and incandescent dis- plays requiring low output saturation voltage, the udn2595a and a2595slw meet many interface needs, including those exceeding the capabilities of standard logic buffers. the eight non-darlington outputs of each driver can continuously and simultaneously sink load currents of 100 ma at ambient temperatures of up to +75 c. the eight-channel driver? active-low inputs can be driven directly from ttl, schottky ttl, dtl, 5 to 16 v cmos, and nmos logic. all input connections are on one side of the package, output connec- tions on the other, for simplified printed wiring board layouts. these drivers are packaged in plastic dlps (suffix a) or surface- mountable wide-body solcs (suffix lw), and are rated for operation over the temperature range of -20 c to +85 c. the a2595slw is also available for operation to -40 c. to order, change the suffix from ?lw?to ?lw? features non-inverting function (input low = output on) 200 ma current rating 100 ma continuous and simultaneous (all outputs) to +85 c low saturation voltage ttl, cmos, nmos compatible efficient input/output pin format dip or soic packaging udn2595a
2595 8-channel saturated sink driver 115 northeast cutoff, box 15036 worcester, massachusetts 01615-0036 (508) 853-5000 50 75 100 125 150 2.5 0.5 0 allowable package power dissipation in watts ambient temperature in c 2.0 1.5 1.0 25 dwg. gs-009-1 suffix 'a', r = 60 c/w ja suffix 'lw', r = 70 c/w ja 13 14 15 16 17 19 12 18 20 11 no connect. 1 2 3 8 9 4 5 6 7 10 no connect. nc nc dwg. pp-064-1 ground +v s a2595slw functional block diagram one of eight drivers dwg. no. a-11,408 copyright ? 1981, 2000 allegro microsystems, inc.
2595 8-channel saturated sink driver www.allegromicro.com current voltage limits characteristic symbol test conditions min. max. units output leakage i cex v in 4.5 v, v out = 20 v, t a = 25 c50 a v in 4.6 v, v out = 20 v, t a = 70 c 100 a output saturation v ce(sat) v in = 0.4 v, i out = 50 ma 0.5 v v in = 0.4 v, i out = 100 ma 0.6 v input current i ln(on) v in = 0.4 v, i out = 100 ma -1.6 ma v in = 0.4 v, i out = 100 ma, v s = 15 v -5.0 ma input voltage v in(on) i out = 100 ma, v out 0.6 v 0.4 v v in(off) i out = 100 a, t a = 70 c 4.6 v input capacitance c in 25 pf supply current l s v in = 0.4 v, i out = 100 ma 6.0 ma v in = 0.4 v, i out = 100 ma, v s = 15 v 20 ma notes: 1. negative current is defined as coming out of the specified device pin. 2. the v in(on) voltage limit guarantees a minimum output sink current per the specified conditions. 3. l s is measured with any one of eight drivers turned on. electrical characteristics at t a = +25 c, v s = 5.0 v (unless otherwise noted).
2595 8-channel saturated sink driver 115 northeast cutoff, box 15036 worcester, massachusetts 01615-0036 (508) 853-5000 0.355 0.204 7.62 bsc dwg. ma-001-18a mm 10.92 max 18 1 9 7.11 6.10 5.33 max 1.77 1.15 0.39 min 0.558 0.356 2.54 bsc 0.13 min 3.81 2.93 10 23.37 22.35 udn2595a dimensions in inches (controlling dimensions) dimensions in millimeters (for reference only) notes: 1. exact body and lead configuration at vendor? option within limits shown. 2. lead spacing tolerance is non-cumulative. 3. lead thickness is measured at seating plane or below. 0.014 0.008 0.300 bsc dwg. ma-001-18a in 0.430 max 18 1 9 0.280 0.240 0.210 max 0.070 0.045 0.015 min 0.022 0.014 0.100 bsc 0.005 min 0.150 0.115 10 0.920 0.880
2595 8-channel saturated sink driver www.allegromicro.com 0 to 8 1 2 3 0.020 0.013 0.0040 min. 0.0125 0.0091 0.050 0.016 dwg. ma-008-20 in 0.050 bsc 20 11 0.2992 0.2914 0.419 0.394 0.5118 0.4961 0.0926 0.1043 0 to 8 1 20 2 3 0.51 0.33 0.10 min. dwg. ma-008-20 mm 1.27 bsc 11 0.32 0.23 1.27 0.40 7.60 7.40 10.65 10.00 13.00 12.60 2.65 2.35 a2595slw dimensions in inches (for reference only) dimensions in millimeters (controlling dimensions) notes: 1. exact body and lead configuration at vendor? option within limits shown. 2. lead spacing tolerance is non-cumulative.
2595 8-channel saturated sink driver 115 northeast cutoff, box 15036 worcester, massachusetts 01615-0036 (508) 853-5000 the products described here are manufactured under one or more u.s. patents or u.s. patents pending. allegro microsystems, inc. reserves the right to make, from time to time, such departures from the detail specifications as may be required to permit improvements in the performance, reliability, or manufacturability of its products. before placing an order, the user is cautioned to verify that the information being relied upon is current. allegro products are not authorized for use as critical components in life-support devices or systems without express written approval. the information included herein is believed to be accurate and reliable. however, allegro microsystems, inc. assumes no responsi- bility for its use; nor for any infringement of patents or other rights of third parties which may result from its use.
2595 8-channel saturated sink driver www.allegromicro.com this page is intentionally left blank
2595 8-channel saturated sink driver 115 northeast cutoff, box 15036 worcester, massachusetts 01615-0036 (508) 853-5000 power sink drivers in order of 1) output current, 2) output voltage, 3) number of drivers output ratings * features serial latched diode internal ma v # input drivers clamp outputs protection part number ? 75 17 8 x x C constant current C 6275 17 16 x x C constant current C 6276 100 20 8 C C C saturated C 2595 30 32 x x C C C 5833 40 32 x x C saturated C 5832 50 8 addressable decoder/driver dmos C 6b259 50 8 C x C dmos C 6b273 50 8 x x C dmos C 6b595 250 50 8 addressable decoder/driver dmos C 6259 50 8 C x C dmos C 6273 50 8 x x C dmos C 6595 135 7 C C x C C 7003 300 45 1 C hall sensor/driver x C x 5140 50 7 C C x C C 2003 50 8 C C x C C 2803 50 8 C C x saturated C 2596 60 4 C C x saturated x 2557 95 7 C C x C C 2023 95 8 C C x C C 2823 350 50 4 C x x C C 5800 50 7 C C x C C 2004 50 8 C C x C C 2804 50 8 C x x C C 5801 50 8 x x C C C 5821 50 8 x x x C C 5841 50 8 addressable decoder/driver dmos C 6a259 50 8 x x C dmos C 6a595 80 8 x x C C C 5822 80 8 x x x C C 5842 95 7 C C x C C 2024 95 8 C C x C C 2824 450 30 28 dual 4- to 14-line decoder/driver C C 6817 600 60 4 C C C saturated x 2547 60 4 C C x saturated x 2549 700 60 4 C C x saturated x 2543 and 2559 750 50 8 C C x saturated C 2597 900 14 2 C hall sensor/driver x saturated x 3625 26 2 C hall sensor/driver x saturated x 3626 1000 46 4 stepper motor controller/driver mos C 7024 and 7029 1200 46 4 microstepping controller/driver mos C 7042 1250 50 4 stepper motor translator/driver C x 5804 50 4 C C x C C 2064 and 2068 1500 80 4 C C x C C 2065 and 2069 1800 50 4 C C x C C 2544 50 4 C C x C C 2540 3000 46 4 stepper motor controller/driver mos C 7026 46 4 microstepping controller/driver mos C 7044 4000 50 4 C C x C C 2878 80 4 C C x C C 2879 * current is maximum specified test condition, voltage is maximum rating. see specification for sustaining voltage limits or over-current protection voltage limits. ? complete part number includes additional characters to indicate operating temperature range and package style.
|
